|
|
Author
|
Topic: Interest in a 1:15 scale X-15 model kit?
|
Retro Rocket Member Posts: 445 From: Santa Paula, Ca,. USA Registered: Dec 2007
|
posted 07-18-2013 05:39 PM
I'd like to kit my X-15 in 1/15th scale, this would be the regular X-15 not the A2, and I was wondering if there's enough interest out there for them, especially considering the cost.The kit would have a fiberglass fuselage, cast urethane wings, horizontals and verticals with separate flaps and speed brakes. It would have a detailed cockpit and landing gear, along with the XLR-99 nozzle and ring. All the little details like pitot tubes and dump tubes will be either white metal or printed steel. And like the A2, the kit would include the large decal sheets needed to cover most of the model, the areas that couldn't be covered would use the printed decals and rivets. The kit cost would be around $1,500. I know that's very expensive as far as kits are concerned but I'd need that to cover the molding costs. I wouldn't anticipate selling more than 10 of these kits so that's the number I'm using to estimate costs. |
mode1charlie Member Posts: 1169 From: Honolulu, HI Registered: Sep 2010
|
posted 07-20-2013 02:57 AM
I would be interested, but the price point would need to be a lot lower - as in an order of magnitude lower. Given the seeming inevitability that 3D printing will soon revolutionize the modeling world, have you considered doing a high-resolution 3D scan and selling via Shapeways or some similar company? |
Philip Member Posts: 5952 From: Brussels, Belgium Registered: Jan 2001
|
posted 07-20-2013 08:17 AM
Indeed about US $750.00 would be a "better" price. |
moonguyron Member Posts: 191 From: Trinity, FL USA Registered: Jan 2011
|
posted 07-21-2013 03:15 PM
Sign me up. That's a lot of money but that's also a lot of model. Your pictures are beautiful. And to think I could own an X-15 with that detail and large scale, I would spring for it at that price. Hope it works. |
Retro Rocket Member Posts: 445 From: Santa Paula, Ca,. USA Registered: Dec 2007
|
posted 07-22-2013 04:02 PM
A kit this size runs into a couple problems as far as cost is concerned, the main one being of course the size. The molds for the wings alone would be close to $2,000. The cockpit molds are the most expensive because there's so many parts that need to be molded, $3,500 for a dozen or so molds would be a big capital investment.I think the way to go with a model this size would be to offer the body, the wings and horizontals then offer all the other parts thru Shapeways, that way you could decide the level of detail you'd like to put on your own model and as more parts are designed, more detail could be incorporated. |
moonguyron Member Posts: 191 From: Trinity, FL USA Registered: Jan 2011
|
posted 07-22-2013 09:09 PM
Good idea. The windows of the X-15 are so small spending a lot on interior may not be necessary. At least an option to reduce cost. The real selling point for me is the true shape, in such a large scale, and the exterior details like rivets, flaps, engine, etc. | |
Contact Us | The Source for Space History & Artifacts
Copyright 2020 collectSPACE.com All rights reserved.
Ultimate Bulletin Board 5.47a
|
|
|
advertisement
|