*HTML is ON
*UBB Code is ON
[b]First NASA Artemis Rocket Core Stage Loaded on Pegasus Barge[/b]
The first Space Launch System (SLS) rocket core stage for NASA's Artemis program completed manufacturing work at NASA's Michoud Assembly Facility in New Orleans and was loaded onto the agency's Pegasus barge on Jan. 8 for delivery to NASA's Stennis Space Center near Bay St. Louis, Mississippi. With NASA Deputy Administrator Jim Morhard in attendance, NASA rolled out the core stage for the SLS rocket onto Pegasus in preparation for the Green Run test series, the final test campaign ahead of the agency's first Artemis launch.
[i][b]Above[/b]: The first Artemis rocket stage is guided toward NASA's Pegasus barge Jan. 8 ahead of its forthcoming journey to NASA's Stennis Space Center near Bay St. Louis, Mississippi.[/i]
"NASA's Space Launch System core stage is part the Artemis program, which is a national asset," said NASA Deputy Administrator Jim Morhard. "The SLS rocket was built to deliver American astronauts and maximum payloads to the Moon and deep space destinations. Rolling out the completed core stage from NASA's Michoud Assembly Facility to go on to NASA's Stennis Space Center for further testing is an exciting leap forward in the Artemis program as NASA teams make progress toward the launch pad."
The roughly 1.3-mile trip from the Michoud factory to the barge's dock is just the start of the SLS flight hardware's journey. Pegasus will ferry the SLS core stage from Michoud to Stennis, where the core stage will be lifted and placed into the historic B-2 Test Stand for the core stage Green Run test campaign that will begin later this year. The Green Run series is a comprehensive test campaign of the stage — from its avionics and propulsion systems to its four RS-25 engines — that will verify the core stage design ready for launch.
"Completion of this first-time build of the Space Launch System rocket's core stages puts humans on the cusp of a new era of space exploration," said John Honeycutt, the SLS Program Manager at NASA's Marshall Space Flight Center in Huntsville, Alabama. "NASA's SLS rocket is designed to evolve so a variety of missions can be accomplished first to the Moon for the Artemis missions and then to Mars and other deep space destinations."
[i][b]Above[/b]: NASA's Space Launch System (SLS) rocket's core stage, complete with all four RS-25 engines, is transported from NASA's Michoud Assembly Facility in New Orleans to the agency's Pegasus barge on Jan. 8.[/i]
Before launching NASA's Orion spacecraft to the Moon, the SLS rocket stage will take the same water route that the first stages of the Saturn V rocket did when it was transported from Michoud to Stennis for testing during the Apollo Program in the 1960s and 1970s. Pegasus, which previously ferried the space shuttle tanks from Michoud to NASA's Kennedy Space Center in Florida, was modified to make it longer and stronger to accommodate the core stage and ferry the SLS rocket hardware. Following Green Run, the barge will carry the core stage flight hardware to Kennedy for launch preparations.
The SLS rocket's core stage is the largest stage NASA has ever built at its Louisiana factory including the Saturn V rocket stages for the agency's first Moon missions. With a design featuring some of the most sophisticated hardware ever built for spaceflight, the core stage is the powerhouse of the SLS rocket. In addition to its miles of complex cabling, avionics and propulsion systems, its two propellant tanks hold a combined 733,000 gallons of propellant to power the four RS-25 engines.
"This is a historic moment for NASA's Artemis program and a proud time for the Space Launch System Core Stage team as the first flight article leaves the factory floor," said Julie Bassler, the NASA SLS Stages manager. "Roll out of the core stage to Stennis ahead of the core stage Green Run test series signals an exciting next phase as NASA prepares for the first Artemis launch. The Green Run test series will verify the stage is ready to ship to the launch site.'"
[i][b]Above[/b]: NASA Deputy Administrator Jim Morhard joins Robert Champion, director of NASA's Michoud Assembly Facility in New Orleans, and John Honeycutt, SLS Program manager and NASA, Boeing and Aerojet Rocketdyne personnel in front of the fully assembled core stage for NASA's Space Launch System rocket as it rolls out from Michoud to NASA's Pegasus barge on Jan. 8.[/i]
Manufacturing the SLS rocket's core stages is a combined effort for NASA and its industry partners. More than 1,100 companies across the United States contributed toward the production of the SLS rocket. Boeing built the core stage at NASA's facility in New Orleans, and Aerojet Rocketdyne upgraded and supplied the RS-25 engines.
Teams at Michoud are working in tandem to manufacture and assemble core stages for the first three Artemis lunar missions. With the assembly of the core stage for Artemis I complete, NASA is focusing its efforts on building the core stages for Artemis II, the first crewed mission of SLS and NASA's Orion spacecraft, and Artemis III, the mission that will send American astronauts to the lunar South Pole.
If you have previously registered, but forgotten your password, click here.
*** Click here to review this topic. ***
Contact Us | The Source for Space History & Artifacts
Copyright 2022 collectSPACE.com All rights reserved.