Author
|
Topic: Pascal Hecker's space models and dioramas
|
apolloprojeckt Member Posts: 1527 From: Arnhem, Netherlands Registered: Feb 2009
|
posted 02-28-2022 11:59 AM
My first model diorama of this year: an Apollo 15 Bulova watch/diorama box. I am happy with the end result. This one is for to keep the two versions Bulova moon watches.The LRV 3D printing files are from designer Vincent Meens and the astronaut is from Max Grüter. (For earlier models, please see: Pascal Hecker's space models (2010-2021).)  









|
garymilgrom Member Posts: 2098 From: Atlanta, GA Registered: Feb 2007
|
posted 02-28-2022 01:31 PM
Unique idea and great work Pascal. Congratulations. |
apolloprojeckt Member Posts: 1527 From: Arnhem, Netherlands Registered: Feb 2009
|
posted 05-07-2022 09:29 AM
My last model is done, this time a rare kit model kit of the Soviet Luna 16 moon probe.This first robotic probe to land on the Moon and return a sample of lunar soil to Earth with 101 grams sample moon soil on mission duration 12 days in year 1970. Scale 1:16 and kit from Soviet brand AMC. They stop now produce this kit related the war with Ukraine.  




|
Rocketman! Member Posts: 156 From: Redmond, Washington, USA Registered: Dec 2007
|
posted 05-07-2022 01:01 PM
Beautiful! Your models look amazing! |
Gilbert Member Posts: 1475 From: Carrollton, GA USA Registered: Jan 2003
|
posted 05-10-2022 02:38 PM
Fantastic models! |
apolloprojeckt Member Posts: 1527 From: Arnhem, Netherlands Registered: Feb 2009
|
posted 05-16-2022 08:34 AM
Project Apollo 15 1/24 deep space EVA wih sub satellite diorama is done. STL file command and service module from Vincent Meens, astronauts STL files from Max Grüter and skin sheet service module from Michael Key.Now on with the Gemini 1/:12 spacecraft. For every one, have a great week!  










|
GACspaceguy Member Posts: 2911 From: Guyton, GA Registered: Jan 2006
|
posted 05-16-2022 10:23 AM
Breathtaking!!!! |
MartinAir Member Posts: 260 From: Registered: Oct 2020
|
posted 05-16-2022 12:34 PM
WOW, impressive! What are those extended poles/antennas for? Were they in that position during the EVA? |
apolloprojeckt Member Posts: 1527 From: Arnhem, Netherlands Registered: Feb 2009
|
posted 05-16-2022 12:54 PM
I believe not, but I try to show all elements of that time frame of the mission. The launch of the sub satellite was also not under the EVA. |
apolloprojeckt Member Posts: 1527 From: Arnhem, Netherlands Registered: Feb 2009
|
posted 07-08-2022 01:03 PM
My next real space diorama, theme 1/4 Apollo 15 astronaut Al Worden ready going out for an EVA walk to pick up film cassettes. Hatch design from Smithsonian is fully printed in resin parts and PLA. Astronaut design is by Max Grüter and film cassette roll is design by Vincent Meens and hatch list and tv cam as well. And thanks to Ed Hengeveld for info over the tv cam. This diorama can be placed flat on the dessior or upright in supports stands and can be hung on the wall. Still busy with a 1/2 version, but that come later.  












|
MartinAir Member Posts: 260 From: Registered: Oct 2020
|
posted 07-08-2022 02:55 PM
Amazing!I think these masterpieces deserve a video channel or at least an episode about their fabrication. |
GACspaceguy Member Posts: 2911 From: Guyton, GA Registered: Jan 2006
|
posted 07-08-2022 03:10 PM
There are absolutely no words that can describe the beauty of these pieces! Well done, again!! |
apolloprojeckt Member Posts: 1527 From: Arnhem, Netherlands Registered: Feb 2009
|
posted 10-08-2022 03:29 PM
I finished the 1/2.5 Apollo hatch after many hours. Lots of printing parts; PLA and resin parts. I had real glass cut for the window section. I am satisfied with it and now understand the construction in terms of parts well after two scale versions. On the inside of the round window I stuck a transparent printed sheet with the ascent LM section on the way back to the CM for docking. It looks great with a lamp behind it.  





|
Jonnyed Member Posts: 589 From: Dumfries, VA, USA Registered: Aug 2014
|
posted 10-08-2022 07:01 PM
Just amazing work! |
Philip Member Posts: 6193 From: Brussels, Belgium Registered: Jan 2001
|
posted 10-09-2022 06:39 AM
Is that a space suit glove by Ryan Nagata? |
apolloprojeckt Member Posts: 1527 From: Arnhem, Netherlands Registered: Feb 2009
|
posted 10-09-2022 12:18 PM
Thanks! No this glove is from this site as also the hatch. |
apolloprojeckt Member Posts: 1527 From: Arnhem, Netherlands Registered: Feb 2009
|
posted 02-02-2023 01:01 PM
These models I build the last few weeks for some people. All 3D printing.First one 1/32 Gemini 9A mission EVA theme.  

The second one is 1/32 Gemini spacecraft theme splashdown.  


And the last 1/12 Artemis RS-25 rocket engine theme factory upbuild version with workers.  




|