collectSPACE: Messages - Edit this post

Space News
space history and artifacts articles

Messages
space history discussion forums

Sightings
worldwide astronaut appearances

Resources
selected space history documents

Forum: Models & Toys
Topic: SFX Models replica Grumman LEM models

Only forum leaders (Administrator, Editor) or the person that posted this message may edit this message (and only registered users may edit/delete posts) Note: Only forum leaders may delete posts.
Delete? To delete this post, check this box.
Your UserName:
Your Password:	Forget your password?
Message to Edit: HTML is ON UBB Code is ON Smilies Legend	Originally posted by sfxmodels on 02-10-2021 04:41 PM New from SFX Models... <blockquote><font size="+0">[b]1964 Grumman Lunar Excursion Module Prototype[/b]</font> The [URL=https://www.sfxmodels.com/1964-lem-prototype]1964 Grumman Lunar Excursion Module Prototype[/URL] is a replica of an original model displayed in the Cradle of Aviation Museum, Long Island, New York. It is the largest model in the "Evolution of the Grumman LEM" display case. <center><a href="http://www.collectspace.com/review/sfxmodels_1964grummanlem01-lg.jpg" target="AirLock"><img src="http://www.collectspace.com/review/sfxmodels_1964grummanlem01.jpg" width="400" height="300" border="0"></a></center> SFX Models has made a faithful but neatened up replica to continue the Grumman LEM range in the belief that, like the others, it's modelled at 1:40th scale. The main components of the model are molded resin while the landing gear is fabricated from brass tube with turned brass footpads and locating pins, all soldered together. The model is finished with sprayed acrylic paints. The ascent/descent stages can be separated and are located in position with stainless steel dowels and internal magnets. The LEM can be removed from the Perspex base. The polished Perspex base is printed with NASA and Grumman logos and has green baize on the underside. Brass pins on the bottom of the foot pads locate the model on this base Model height is 222mm (8 3/4 inches) and the Perspex base diameter is 360mm (14 1/8 inches).</blockquote>
	Disable Smilies in This Post.
*If HTML and/or UBB Code are enabled, this means you can use HTML and/or UBB Code in your message.

Contact Us | The Source for Space History & Artifacts