*HTML is ON
*UBB Code is ON
[b]Repair spacewalk planned for Friday[/b]
NASA has decided to wait until Friday to conduct a spacewalk to replace a failed ammonia pump module on the International Space Station.
Mission managers, program managers, flight controllers, engineers, astronauts and spacewalk experts made the decision on Monday evening after further analyzing and refining engineering requirements, and reviewing the results of an underwater practice session.
Expedition 24 astronauts Doug Wheelock and Tracy Caldwell Dyson currently are scheduled to start the repairs on the station's starboard truss Friday.
Fellow astronauts Cady Coleman and Suni Williams spent Monday afternoon in the Johnson Space Center's Neutral Buoyancy Lab (NBL) practicing underwater the tasks needed to restore the cooling loop over the course of two spacewalks.
Meanwhile, robotics experts are continuing to refine the procedures that will be used by Expedition 24 flight engineer Shannon Walker to guide Canadarm2 as she moves Wheelock into position to swap the failed unit with a spare unit currently stored on External Stowage Platform 2, which in turn is attached to the Quest airlock.
The station today remains in a stable configuration. The crew is on a normal sleep shift, and supporting a normal workday, but most of their planned activities this week have been canceled or deferred in order to support spacewalk preparations.
Plans are in work to move the station's Mobile Transporter into position on the Starboard 1 truss on Tuesday. With the Mobile Transporter positioned early, the team will be able to gather additional data to confirm power resources are sufficient to use the arm to support the spacewalk.
Each pump module weighs 780 pounds and is 5.5 feet long (69 inches) by 4 feet wide (50 inches), and is 3 feet tall (36 inches). The spacewalkers will need to disconnect and reconnect five electrical connectors, four fluid quick-disconnect devices, one fixed grapple bar and four bolts.
The spare pump module that will be used to replace the failed unit was delivered to the station on the STS-121 mission in July 2006.
The pump failed Saturday night after a spike in electrical current tripped a circuit breaker. When the pump failed, it shut down half of the station's cooling system.
Efforts to restart the pump, which feeds ammonia coolant to maintain the proper temperature for the station's electrical systems and avionics, were not successful. The station's crew worked with Mission Control to put the station in a stable configuration.
NASA TV coverage will begin at 5 a.m. CDT and Wheelock and Caldwell Dyson will begin the spacewalk at 5:55 a.m. Friday. In the first spacewalk, they will unbolt and remove the failed pump module, and install the spare.
A second spacewalk to hook up a variety of electrical and fluid connections for the new pump module could occur two or three days after the first.
If you have previously registered, but forgotten your password, click here.
*** Click here to review this topic. ***
Contact Us | The Source for Space History & Artifacts
Copyright 2018 collectSPACE.com All rights reserved.