|T O P I C R E V I E W|
|Colossus||There has been some interesting things developing at Shapeways: 1/400 LUT Levels 3-8 (Launch Umbilical Tower) NASA. The shop also has an 1/400 MLP and crawler for the shuttle and Saturn V.|
You might also be interested in Alternate Visions.
|mode1charlie||Interesting. I look forward to seeing how this project develops. It would definitely fill an empty niche in the market.|
|Colossus||I've just posted a 1/72 and 1/144 Mars Excursion Module on Shapeways. They're a bit pricey, but I hope worth it.|
|Colossus||Pictures of the actual model have been added. Thanks for looking!|
|Colossus||A 1:400 N-1 and a few other Russian/Soviet rockets are available in my Shapeways store. Thanks for looking!|
|David C||Good work. Any chance of a 1/144 scale Vostok and N-1? I don't do metric scales.|
quote: I'll think about it. I've tended to shy away from areas where other manufacturers are already producing product at that scale. I believe RealSpace Models has a 1/144 scale N-1.
Originally posted by David C:
Any chance of a 1/144 scale Vostok and N-1.
First, it will be pretty expensive, second, I could certainly enlarge the models, but they are really optimized for detail at the smaller scales. You certainly won't have Bandai Saturn V levels of detail if I enlarge my model. Thanks for looking!
|David C||Ah, good point.|
|Norman.King||Not knowing anything about 3D printing can you explain the different material options available. I'd want the best finish for detail painting.|
|apolloprojeckt||That is high detail frost, but then you can dive deep into your wallet.|
|Tad_N||How about a pair of 1/24 Gemini Titan Engines? None exist...|
quote: I thought that had a rough surface texture? Wouldn't a smooth surface finish be better for painting?
Originally posted by apolloprojeckt:
That is high detail frost, but then you can dive deep into your wallet.
|apolloprojeckt||Colossus, maybe you can look also in your Shapeways mail box. |
|Colossus||I did and I thought I replied to your question, but I might not have understood you clearly. Thanks for looking!|
quote: I'll take a look, but modeling something like that will take a lot of time even in a software program.
Originally posted by Tad_N:
How about a pair of 1/24 Gemini Titan Engines?
quote: The information offered on the Shapeways site and forums is pretty good in that regard. You might get a more detailed and definitive response if you ask there.
Originally posted by Norman.King:
Not knowing anything about 3D printing can you explain the different material options available.
I've only generated prints in WSF and Detail materials and not painted them so my experience is somewhat limited. WSF has a definite texture to it, but it conveys an acceptable level of detail depending on the model.
The detail materials are probably a better bet from a finish standpoint, but they are pricier.