*HTML is ON
*UBB Code is ON
[b]Aft Skirt Hot Fire Test... Check![/b]
Today, Ares I-X passed another significant milestone when engineers and technicians successfully completed a hot fire test of the hardware at the Aft Skirt Test Facility at Kennedy Space Center.
The hot fire test is actually a series of tests performed on the Aft Skirt - primarily the Thrust Vector Control (TVC) System. Before the test, the fuel systems are checked for leaks and filled with hydrazine (rocket fuel). The hot fire is a two-minute run of the Auxiliary Power Units (APU) using the hydrazine just as it would on launch day. The electro hydraulic servo-actuators, which control the direction the nozzle is pointing, are commanded to move to various positions to make sure they respond properly to commands. Additionally, the power units are run at 100%, 110% and 112% of capacity to assure that all redundancy modes are working properly.
When the test has been successfully completed the hydraulic systems are left as they are and the hydrazine is taken out. The system will stay in that condition until the Ares I-X vehicle is at the launch pad where the system will be refueled with hydrazine in preparation for launch.
With this milestone complete, the aft skirt will be transferred to the Rotation Processing and Surge Facility next month and attached to the aft motor segment. When attached, these two pieces of hardware make up the aft assembly and will be the first hardware to be stacked on the Mobile Launcher Platform in the Vehicle Assembly Building when that process begins in June.
If you have previously registered, but forgotten your password, click here.
*** Click here to review this topic. ***
Contact Us | The Source for Space History & Artifacts
Copyright 2018 collectSPACE.com All rights reserved.