Note: Only forum leaders may delete posts.
*HTML is ON *UBB Code is ON Smilies Legend
Smilies Legend
CSA wants to develop an interactive exhibit around the Canadarm that will present its story and the major accomplishments for Canada. The interactive exhibit shall be a self-sufficient, creative, hands-on and highly interactive complement to the Canadarm display, using leading-edge visitor-engagement technologies (known as intuitive "touchless" interactive technology). We are exploring the possibility to install the Canadarm at the CSA for a period of three to four years. After this period of time, the CSA would be looking at the possibility of doing a long-term loan with a Canadian museum. The proposed exhibit might eventually need to be reinstalled, at a selected permanent location. Therefore, the components used need to be flexible and adaptable to another venue. If the robotic arm was to be installed in CSA's head office main rotunda, this would be done in one of the following ways: [list=1][*]Horizontal Position: One end positioned two (2) feet from the floor rising at an acute angle (approx 12 degrees, TBC) to its furthest extremity... supported at this furthest end either by another stand or alternatively fixed to the interior wall of the Rotunda) [*]Vertical Position: One end of the arm fixed at a low point some two (2) feet off the floor. The other rising 45 degrees and doubling back at the joint to form a V with this extremity supported either by guy wires from the roof structure or a retaining bracket extended from one of the walls of the Rotunda)[/list]
Contact Us | The Source for Space History & Artifacts
Copyright 1999-2024 collectSPACE. All rights reserved.